More information on how to renovate your bathroom may be found here.
You're redoing the bath.
A new bathroom may be constructed in eight simple steps with confidence. Make floor drawings for both your existing and future bathrooms to see what electrical and plumbing changes are needed. The drawings will indicate the positions of the new sanitary ware and furniture, as well as the hot and cold water pipes. Remove the toilet, shower, bath, and sink from the room. Turn off the water at the main and all individual supply points.
Remove the old tiles from the flooring and walls using a chisel or drill. Depending on the style of your new bathroom, you may need to change the plumbing. Mains water should be shut off. Remove unused supply pipes using a multi-purpose tool. Follow conventional pipe-laying techniques. Moving electrical wiring may be required for your new bathroom plan, which may be costly.
Before beginning any bathroom improvements, make sure the wiring and sockets are in excellent working condition. It is generally best to rebuild the walls first, then the floors. To properly tile your walls, you'll need to work in phases and utilize the right tools and materials for each stage. Choose a bathroom paint intended for a long-lasting finish. Preparing the floor for ceramic tile or vinyl flooring may be required.
Shower kits and columns, riser rails, and other accessories are available. Bathtubs come in three shapes: rectangular for small bathrooms, corner for larger bathrooms, and island for large bathrooms. You may also get hydromassage tubs with powerful water jets for a luxurious bathing experience. Towel warmers are essential in every bathroom since they not only dry your towels but also heat the space. Always select an IP grade that matches the bathroom zone where the light fixture will be installed. Make sure the main power is off before performing any electrical work.
A new bathroom may be built in eight easy stages.
Your bathroom is a special place in your home with a special function. It should be relaxing since it is an oasis of quiet, but it must also be useful because it is a functional place. Therefore, it is worthwhile to take the risk of designing and constructing your own bathroom in the style of your choosing. It may seem that remodeling your bathroom would be a difficult task. As a result, we've broken down the task into manageable stages that you can do with confidence.
Create a floor plan for your bathroom.
It is critical to create floor plans for both your current bathroom and your future bathroom. This will assist you in determining what modifications to the electrical wiring and plumbing are required. Begin by sketching a floor layout of your bathroom as it now exists. The locations of the new sanitary ware and furnishings that you want to purchase. After that, sketch up a design for your future bathroom. The following should be shown in this drawing:
- The locations of the new sanitary ware and furnishings that you want to purchase.
- The plumbing modifications you'll need to make, such as any water and drain pipes you'll need to remove, relocate, or replace, will be detailed below.
- What the plumbing system looks like right now, showing the locations of the hot and cold water lines, as well as the drain pipes
- What modifications you need to make to the electrical wiring, such as which cables and sockets you need to remove, relocate, or replace, and how much time you have to complete the project.
- The new sanitaryware, which includes the shower, bath, washbasin, and toilet, among other things.
- The new furniture and storage containers were delivered on time.
- The new plumbing system, which includes hot and cold water supply points as well as drain pipes, was installed.
- The new electrical system, which includes plugs, lights, and electric radiators, is being installed.
Remove the old bathroom from the house.
A variety of things related to the power supply, water supply, and drainage may be found in bathrooms. Dismantling your old bathroom should be done in the following sequence to ensure safety: first, remove all of the electrical equipment from the room, then the furniture, and lastly all of the things that are linked to the plumbing. Electrical appliances The majority of the electrical appliances in the bathroom are for heating. Before you begin working, turn off the electricity at the main switch. Remove the radiator or towel warmer if it is present. To ensure optimum safety, connect each exposed wire with a fast connection or terminal block. Remove the light fixtures in the same manner as before. The light fixtures should be installed last if there is little natural light in your bathroom. That way, you'll have enough light to do the other tasks you have planned.
Furniture Remove.
All of the furniture, including cupboards, bookcases, and mirrors, from the room. Sanitaryware. Remove all of the remaining fixtures, including the toilet, shower, bath, and sink, from the room. Before you begin working, turn off the water supply at the main and at the supply points for each individual item. For the time being, leave the drains and pipes in their current locations. When removing the bath, start by removing the surround and the faucets, then go on to the actual bath. You should save the shower for last so that you may take use of it for as long as feasible! -
Cleaning showers.
Begin by removing the shower panels, followed by removing the rubber gaskets and pulling the enclosure away from the wall. Remove the shower drain fitting from the wall. To access and disconnect the water supply pipes, move the enclosure just enough away from the wall so you can see them. Remove the shower enclosure from the bathroom. To make the following procedures simpler, remove the shower enclosure panels first, if at all feasible, before removing the shower. Remove the mixer, taps, and drain fittings, and then the drain pipe. Detach and remove the tray itself after removing any silicone seals that may have formed around it. Last but not least, remove the drain pipe.
Remove the old tiles off the floor.
Having removed all of the fixtures and furnishings, the following step is to remove the old floor and wall tiles from the subfloor and walls.
Remove the tiles from the floor.
It is not difficult to remove old floor tiles, but you will need the proper equipment and safety gear in order to do it properly. To get rid of your old floor tiles, just follow these easy steps:
- Remove the skirting board from the room.
- Find a tile that sounds loose and shatter it with a chisel or a drill to reveal the grout below.
- Remove the tiles that are still in place.
- Remove any leftover grout and adhesive using a stiff brush.
- Remove any debris and thoroughly clean the floor.
Take down the wall tiles.
The process of removing wall tiles is quite similar to the process of removing floor tiles.
Make changes to the plumbing system.
It is possible that you may need to alter the plumbing in your new bathroom, depending on how you want to design it. Here is a list of potential modifications.
- Drainage points may be relocated or eliminated.
- Water supply points may be relocated or eliminated.
- Drainage canals are being constructed from scratch.
Availability of water sources
The water supply should be turned off at the mains. Make use of a multi-purpose tool to remove the supply pipes that are no longer required. Refer to your drawings and install any additional supply pipes that are required. Always utilize equipment and materials that are appropriate for the job. Follow industry-standard pipe-laying procedures. If you have vertical plumbing, the cold pipe should be on your right, and the hot pipe should be on your left. In horizontal pipework, the cold pipe is located under the hot pipe, while the hot pipe is located above the cold pipe.
Drains for waste water
Observe the blueprints and determine the precise location of where you will be installing the new drains. When it comes to removing or relocating old drain pipes, a PVC pipe cutter may be used to get rid of the pipes and fittings that are no longer needed. Complete the assembly of all of your new PVC pipes and fittings in order to create your new drainage system.
Drainage canals are important.
The water supply should be turned off at the mains. Make use of a multi-purpose tool to remove the supply pipes that are no longer required. Refer to your drawings and install any additional supply pipes that are required. Always utilize equipment and materials that are appropriate for the job. Follow industry-standard pipe-laying procedures. If you have vertical plumbing, the cold pipe should be on your right, and the hot pipe should be on your left. In horizontal pipework, the cold pipe is located under the hot pipe, while the hot pipe is located above the cold pipe.
Make changes to the electrical wiring.
Your new bathroom's layout may need the relocation of electrical wiring, which may cost you extra money.
Electrical safety requirements for bathrooms
There are specific criteria for bathroom electrical wiring, and it must be done with caution. Make certain that the electrical appliances you select have the appropriate protectionrating for the zone in which they will be installed.
Changing the electrical wiring that is already in place
In order to properly install new sockets or replace old ones, it is a good idea to first inspect the current electrical wiring and ask yourself a few important questions, such as the following:
- Are there any circuit breakers on the system?
- Is there a link between the system and the earth?
- Is there a sliver of bare wire visible?
Check the state of the wiring and sockets in a bathroom before starting any renovations to ensure that they are in good working order. Both the old and new parts of the electrical system must be in compliance with the applicable codes and regulations. Once you're happy with the results, you may modify the circuit and rearrange the wires as necessary to add additional sockets, switches, and light fixtures. Always turn off the electricity at the breaker box before beginning work on the electrical system for your own safety and protection.
Renovate the inside of your home.
It is usually preferable to remodel your walls first before moving on to the floor. You will avoid damaging your freshly placed floor coverings in this manner.
Choosing the right wall coverings
There are certain kinds of wall coverings that are not appropriate for use in the bathroom. Material selection must be based on its ability to resist excessive humidity and water splashes. On the surface, it seems that the only options are waterproof paint or wall tiling. Depending on whether you want to paint or tile your walls, you will need to prepare your walls in a somewhat different manner. If your surface is somewhat uneven, adhesive and tiles will cover it up; but, if you are painting, you will need a perfectly smooth, flawless surface. Painting requires a greater level of preparation than tiling, however once it is completed, painting is much less difficult than tiling. Choose a paint that has been specifically designed for bathrooms in order to provide a long-lasting finish. This kind of paint will be more resistant to humidity. To tile your walls correctly, you'll need to break the project down into many stages and use the appropriate equipment and supplies for each step.
Place your floor covering on the ground.
Prior to putting in the furniture, you should finish laying the floor. Ceramic tile is the most common kind of floor covering in bathrooms, but you may also use other types of floor coverings in the bathroom. Certain items must be completed before you can begin laying your floor. Drains for walk-in showers and low-profile trays are two examples of this kind of product. A firm, level, and clean floor surface must be used to install any floor coverings, including carpeting. According on the kind of covering you choose, you may also need to use a leveling agent on the surface. Depending on whether you choose ceramic tiles or vinyl flooring, you may need to prepare the floor beforehand. After you've completed the necessary preparations, you may begin laying the covering. If you don't like ceramic tile, you may choose another kind of covering instead, which we explain in this section of the guide.
Organize the sanitary equipment.
It is possible to begin installing the different things that must be linked to the water supply and drains after the floor has been put down and dried completely.
Shower kits and columns are available.
Shower heads, riser rails, and other accessories are all available in a variety of styles and sizes, as well as in kits and fully-equipped column configurations. For the most comprehensive experience, the column may incorporate a hydromassage function with water jets as well as other features. You may leave your panels open to create a walk-in shower that is both functional and attractive. As an alternative, you may choose between a sliding, pivoting, swinging, or folding door to shut your shower - whatever option works best for the arrangement of your bathroom.
Toilets that are both floor-mounted and wall-hung
Toilets are available in a variety of configurations, including traditional floor-mounted types and wall-hung variants. Models that are mounted on the wall look fantastic once they are in place, but they are more difficult to install since they need a support structure.
Bathtubs
Bathtubs are available in a variety of forms to accommodate a variety of bathroom layouts: Bathrooms may be divided into three types: rectangle for basic bathrooms, corner for bathrooms that need more space, and island for big bathrooms. You may also obtain hydromassage tubs with strong water jets for a genuine touch of luxury in your bathing experience. If there are any leaks, switch on the water supply after you've finished connecting all of the sanitaryware. Check to see sure the drains are operational as well.
Mirrored cabinets are a kind of vanity unit.
It is possible to install either a single-basin vanity unit or a double-basin vanity unit, depending on the design of your new bathroom and the amount of available space. Built-in or countertop basins are available, and your vanity unit may be wall-hung or floor-standing, and it can be whatever dimension you want.
Towel warmers are a kind of electric heater.
Towel warmers are a must-have in every bathroom since they not only retain and dry your towels, but they also assist to heat the area. Because they are small, they may be used in any kind of bathroom, and they are available in a variety of designs to complement your interior decor.
Fixtures for lighting
Wall lamps, ceiling lights, and recessed spotlights are all good options for lighting your bathroom. Always choose a protection grade that is appropriate with the bathroom zone in which you want to install the light fixture. For example, you may install IP 65 extra-low voltage lighting above your shower if you have enough space. This is for your own protection. Before doing any electrical work, be sure that the main power is turned off. When connecting new appliances, always follow the manufacturer's instructions to ensure that they are properly connected. Our installation service makes it even simpler to realize your vision for your ideal bathroom space. We collaborate with authorized installers to ensure that your project runs smoothly from beginning to end. Our installers can not only fit your design to your specifications, but they can also complete the finishing touches for you, saving you the time and effort.
The basics of bathroom renovation.
- A new bathroom may be constructed in eight simple steps with confidence.
- Make floor drawings for both your existing and future bathrooms to see what electrical and plumbing changes are needed.
- The drawings will indicate the positions of the new sanitary ware and furniture, as well as the hot and cold water pipes.
- Remove the toilet, shower, bath, and sink from the room.
- Turn off the water at the main and all individual supply points.
- Remove the old tiles from the flooring and walls using a chisel or drill.
- Depending on the style of your new bathroom, you may need to change the plumbing.
- Mains water should be shut off. Remove unused supply pipes using a multi-purpose tool.
- Follow conventional pipe-laying techniques.
- Moving electrical wiring may be required for your new bathroom plan, which may be costly.
- Before beginning any bathroom improvements, make sure the wiring and sockets are in excellent working condition.
- It is generally best to rebuild the walls first, then the floors.
- To properly tile your walls, you'll need to work in phases and utilize the right tools and materials for each stage.
- Choose a bathroom paint intended for a long-lasting finish.
- Preparing the floor for ceramic tile or vinyl flooring may be required.
- Shower kits and columns, riser rails, and other accessories are available.
- Bathtubs come in three shapes: rectangular for small bathrooms, corner for larger bathrooms, and island for large bathrooms.
- You may also get hydromassage tubs with powerful water jets for a luxurious bathing experience.
- Towel warmers are essential in every bathroom since they not only dry your towels but also heat the space.
Written by
BrookPad Team